CPC Pool/Hot Tub Multifunctional Small Chlorine Tablets – 1kg

Features we love 

• Chlorine tablets for hot tubs, spas & swimming pools 
• Keeps your pool in the best condition all year round
• Super easy to use as they dissolve slowly and safely
• Kills unwanted bacteria and controls algae
• Multifunctional tablets that clarify as well as sanitise

All about me

Our Multifunctional Small Chlorine Tablets will keep your pool and hot tub water crystal clear. These chlorine tablets are designed to be used with a floating dispenser, making it easy to maintain the correct level of chlorine. Chlorine is highly effective at eliminating bacteria to keep spa water is safe.

These multifunctional tablets also clarify and remove algae from your water as well as sanitise it – clarifiers helps keep the water clear, while algaecides help prevent algae by shocking the chlorine algaecides. Whether you’re enjoying a dip in your pool on a hot summer’s day or soaking in your hot tub on a chilly evening, our chlorine tablets will keep your water clean and healthy!

Need to know

Please note: Designed for commercial use and not recommended for Jacuzzi® domestic hot tubs and several other makes of hot tub, as overuse can result in damage to your spa. If in doubt about their usage, get in touch.

How to use

Place a tablet in your floating dispenser. Test daily and adjust chlorine levels as needed.

A chlorine level between 3-5mg/l must be maintained in your hot tub/spa at all times. The addition of your chlorine granules will depend upon usage*; it could be daily or every 2-3 days. For 1mg/l, add 2g per 1000 litres.

*We advise to use test strips to test sanitiser levels, pH levels and Total Alkalinity (TA).

Top tip: 10ml = approximately 10g

FAQs

What is multifunctional chlorine?

Multifunctional hot tub chlorine clarifies and removes algae from your water as well as sanitises it – clarifiers help keep the water clear, while algaecides help prevent algae by shocking the chlorine algaecides.

How soon can I use my pool after adding chemicals?

Once you’ve added chemicals to your swimming pool, we advise that you wait for at least 20 to 30 minutes before testing the water again. If the levels are balanced, you can take a dip.

If levels are showing as too high or too low, it could take up to 24 hours for the balance to adjust. Be sure to test the water each time and refer to the chemical’s instructions for use.

How often should I test my pool‘s water?

We recommend you test your pool‘s water daily whether your swimming pool is in use or not.

What should pool water be tested for?

Test your swimming pool‘s water for sanitiser levels – along with pH and total alkalinity. This then allows you to make any chemical adjustments that may be required.

For more advice on maintaining your pool using our chlorine tablets, discover our handy chlorine maintenance guide here.